✓ Royal Mail Authorised Inspector since 2008 | Trading since 2005
IN600 Connection Support
Quadient IN600 · Connection
How the Quadient IN600 connects over a LAN to add postage and reach Online Services, and how to set the connection and LAN parameters.
How does the IN600 connect?
The IN600 connects through a high-speed LAN (local area network) to add postage and reach Online Services. LAN settings can only be configured if the machine was plugged into the network at power-up.
How do I set the Online Services connection on the IN600?
Choose the connection type from Communication Settings in Supervisor mode.
- Log in as supervisor.
- Press Menu.
- Select Communication Settings and press OK.
- Select Type of Connection and press OK.
- Select LAN and press OK.
Note: If the LAN was not plugged in you will see a warning – check the cable or device and press OK.
How do I set the LAN parameters on the IN600?
Use automatic configuration unless your network needs manual settings.
- Log in as supervisor.
- Press Menu.
- Select Communication Settings and press OK.
- Select LAN Settings and press OK.
- Select AUTO to configure automatically (recommended), or MANUAL to set values yourself.
- For a standard setup, set DHCP Auto on, DNS Auto on and Half Duplex, pressing OK to confirm.
IN600 Connection – Frequently Asked Questions
How does the IN600 connect to add postage?
It connects over a high-speed LAN network. The LAN can only be set up if the machine was plugged into the network when it was switched on.
Why won’t my IN600 connect to the LAN?
Check the network cable is plugged in, then set the connection type to LAN and use AUTO configuration in Communication Settings.
Should I use AUTO or MANUAL LAN settings on the IN600?
AUTO is recommended for most networks. Use MANUAL only if your IT setup requires fixed values.
Still having connection problems with your IN600?
Our technical team are Royal Mail Authorised Inspectors and fully qualified franking machine engineers. Call us on 01543 572 776 – Mon–Fri 8:30 to 17:00.